AXIS TU8010 2-port PoE Extender - User Manual Setup Guide

802.3af/at/bt PD detected Green Flashing every 3 seconds Standing by Green Flashing every other second Warming up Red Solid Overload/overcurrent detected Red Flashing Invalid Power over Ethernet (PoE) IEEE 802.3af/at/bt PD detected Technical issues, clues, and solutions Problems turning on the camera Compatibility issue Make sure the camera is compatible with the PoE extender. For a list of compatible products, see the PoE extender’s product page at LLDP protocol Turn off LLDP. In the camera’s web interface, go to System > Plain config , select group Network , and clear LLDP Send Max PoE . Low temperatures At low temperatures, the device warms up before it starts. It can take up to 30 seconds to warm up, and during this time the PoE STATUS LED on port 1 flashes green every other second.

Power output options

Troubleshooting

LED indicators

POWER ON STATUS
Color	State	Indication
Green	Solid	Internal power converter on and ready to apply power to output ports
Green	Flashing	Internal power converter in light load condition

LINK: link speed
Color	State	Indication
Amber	Solid	100M/1000M link speed
Amber	Off	10M link speed

ACT: activity

Color

State

Indication

Green

Solid/flashing

Data transmission in progress

PoE PSE POWER IN
Color	State	Indication
Green	Solid	Power over Ethernet (PoE) 802.3bt Type 4 Class 8 power sourcing equipment connected
Amber	Solid	Power over Ethernet (PoE) 802.3bt Type 4 Class 6 power sourcing equipment connected

PoE STATUS
Color	State	Indication
Green	Solid	Valid Power over Ethernet (PoE) IEEE 802.3af/at/bt PD detected
Green	Flashing every 3 seconds	Standing by
Green	Flashing every other second	Warming up
Red	Solid	Overload/overcurrent detected
Red	Flashing	Invalid Power over Ethernet (PoE) IEEE 802.3af/at/bt PD detected

Technical issues, clues, and solutions

Problems turning on the camera
Compatibility issue	Make sure the camera is compatible with the PoE extender. For a list of compatible products, see the PoE extender’s product page at
LLDP protocol	Turn off LLDP. In the camera’s web interface, go to System > Plain config, select group Network, and clear LLDP Send Max PoE.
Low temperatures	At low temperatures, the device warms up before it starts. It can take up to 30 seconds to warm up, and during this time the PoE STATUS LED on port 1 flashes green every other second.

AXIS TU8003 90 W Connectivity Midspan - User Manual Setup Guide

Product overview Optical fibre connector (SFP) Network connector RJ45 (PoE) Ethernet RJ45 connector (DATA) Audio connector Power connector I/O connector PoE LED Power LED Setup About the device When you connect your device to a supported Axis camera, settings for audio and I/O will appear on the c

AXIS V5938 PTZ Network Camera - User Manual Setup Guide

Installation Installation video for the product. Preview mode Preview mode is ideal for installers when fine tuning the camera view during the installation. No login is required to access the camera view in preview mode. It is available only in factory defaulted state for a limited time from power

AXIS Troubleshooting guide for image quality

Trouble with image quality? You’ve come to the right place! This guide helps you troubleshoot issues with image quality. The correct image quality for your surveillance video depends on the objectives of your project. In this guide we go through some important parameters affecting image quality; s

AXIS Troubleshooting guide for network connection

Network trouble? You’ve come to the right place! This guide helps you troubleshoot issues connected to your network. The infrastructure The network is the most unpredictable source of problems in your system. Everything in the network between senders and receivers, for example switches, routers, c

AXIS TU9001 Control Board - User Manual Setup Guide

Installation Connect the USB cables according to the table. Computer AXIS TU9002 AXIS TU9003 USB type A USB type C USB type A USB type C USB type A USB type C Specifications Product overview AXIS TU9001 AXIS TU9002 AXIS TU9003 AXIS TU9002 J1 or rewind button J2 or play/pause button J3 or forward b

AXIS Troubleshooting guide for pan and tilt cameras

Trouble with pan-and-tilt cameras? You’ve come to the right place! This guide helps you troubleshoot issues with pan-and-tilt cameras. Shocks and vibrations are the main factors that affect the mechanical pan and tilt devices. They are common in installations with strong winds, heavy vehicles pass

AXIS TW1200 Mini Bullet Sensor - User Manual Setup Guide

This is the Axis body worn solution The Axis body worn solution Body worn solution Body worn system Content destination AXIS Body Worn Assistant AXIS Body Worn Live Body worn camera Docking station System controller Network AXIS Body Worn Manager RFID reader (optional) The Axis body worn solution

AXIS V5925 PTZ Network Camera - User Manual Setup Guide

Installation Preview mode Preview mode is ideal for installers when fine tuning the camera view during the installation. No login is required to access the camera view in preview mode. It is available only in factory defaulted state for a limited time from powering up the device. This video demons

AXIS Troubleshooting guide for streaming issues

Trouble with video streams? You’ve come to the right place! This guide helps you troubleshoot issues with streaming. Cannot retrieve stream in client Problem Typical error message that shows up when you try to request a 1080p stream from a device that only supports a maximum resolution of 720p. Ex

AXIS TU8011 4-port PoE Extender - User Manual Setup Guide

Power output options Troubleshooting LED indicators POWER ON STATUS Color State Indication Green Solid Internal power converter on and ready to apply power to output ports Green Flashing Internal power converter in light load condition LINK : link speed Color State Indication Amber Solid 100M/1000